Curtis Teets · 30-year Columbus mold remediation expert.
Mold Remediation in Reynoldsburg, Ohio
iDry Columbus is an owner-run, licensed and insured restoration company from Columbus that does mold work in Reynoldsburg. Every job starts with a free inspection to find where the moisture is coming from.
Not a franchise. Not a call center. One number for water, mold, odor, and hoarding — 614-810-0000.
What remediation means and when your home needs it
Removing mold you can see is not the same as fixing the reason it grew.
Mold removal cleans the surface. Remediation goes further. It contains the area, takes out the contaminated material, fixes the water problem and confirms the space is clean and dry before the job is called done.
A small patch on a hard surface, under about 10 square feet, is usually a job you can do yourself. Clean it with detergent, dry it fully and stop whatever got it wet. Past that size, or anywhere you can't see, containment and HEPA filtration start to matter.
Signs it is more than a cleanup
Call for help in any of these cases: growth keeps coming back after cleaning, the home just took on water, the mold is inside a wall, attic, crawl space, duct or under flooring, or you smell musty air and can't see anything.
When it might not be mold
White crust on block or stone basement walls is often mineral salt left by water, not mold. A proper inspection sorts this out so you don't pay for work you don't need.
How we do the work, step by step
Each job follows the same order, so nothing gets covered up before the cause is fixed.
The order matters. If the moisture source is skipped, the job fails no matter how clean the surfaces look afterward.
Find the moisture
Thermal imaging spots temperature differences that point to hidden water behind walls and under floors. Pin and pinless moisture meters confirm what the camera suggests at each suspect spot. The full scope is mapped before anything is cut.
Contain the area and filter the air
Plastic sheeting seals off the work area, and negative air machines pull air out through HEPA filters so disturbed spores don't drift into clean rooms. HEPA air scrubbers run the whole time the work is going on.
Remove and clean
Porous material with growth, such as drywall, insulation or carpet pad, is cut out and bagged inside containment. Hard surfaces are HEPA-vacuumed and treated, not painted over.
Fix the cause, then verify
The leak, drainage or humidity problem gets corrected and antimicrobial is applied to the remaining framing. Containment stays up until moisture readings are at target and the area checks out clean.
What decides the cost of a mold job
Cost depends on scope, and scope is set by what the inspection finds, not by the size of the stain.
We don't quote a number before we know what is behind the wall. The free inspection comes first, and the estimate is written line by line from what it found.
The moisture source is usually the most expensive part to ignore. Leaving it in place can turn a small cleanup into a much bigger repair later.
How far the growth reaches
Mold inside wall cavities, attics, crawl spaces or ductwork means more material comes out and more area needs containment than a surface patch does.
What is feeding it
A slow plumbing leak, seepage at the foundation, attic condensation and a damp crawl space each need a different fix, and that fix is part of the job.
How long it has been growing
Several kinds of mold on one surface usually means the moisture has been there for months. That calls for heavier containment and removal of all porous material in the affected zone.
What to expect on the day
You will know what we found and what we plan to do before any work starts.
The technician walks the area with thermal imaging and moisture meters and shows you where the readings are high. Wet readings in a spot with no visible mold tell you the problem is bigger than what you can see. Dry readings around a stain can mean the source has already stopped.
If the work goes ahead, the area is sealed and the air filtration is running before any material is removed. The containment doesn't come down until the readings show the space is dry and the area checks out clean.
If you don't need remediation
Sometimes the inspection shows a surface problem or no mold at all. If that is the case, we tell you so.
Choosing who to call
Before you hire anyone for mold work in Reynoldsburg, ask how they will find and fix the moisture, not just how they will clean.
iDry Columbus is owner-run and locally owned in Columbus, with IICRC-trained technicians and 30 years of restoration work in the area. The phone is answered 24/7 at 614-810-0000.
Be careful with anyone who wants to spray and paint without opening up the problem, or who quotes a price without checking for hidden moisture.
Mold and water jobs we've finished in Reynoldsburg
Here are two recent Reynoldsburg jobs from our records: one with mold on attic framing and insulation, and one flooded basement that needed drying.
Reynoldsburg (43068) ·
What we found: Attic mold growth on framing and insulation during remediation work—note dark staining and white fungal colonies on wood joists.
What we did: Whole-home air duct cleaning, Register reattachment and duct sealing, Deodorizer application, Crawl space vapor barrier installation.
Finished and cleared.
Reynoldsburg (43068) ·
What we found: Active water damage drying setup: dehumidifiers and air movers deployed in open wall cavity space during remediation phase.
What we did: Emergency Service Call, Dehumidifier (LGR, commercial), Air mover (drying fan), Contaminated Drywall Removal and Disposal.
Finished and cleared.
From iDry Columbus field records - the photos, readings and notes of each project. Written with Able and approved by the owner on 2026-10-14.
What Columbus Homeowners Say About iDry
-
Kendra Turner ★★★★★
iDry Columbus went above and beyond for my family when we had a water emergency. They responded quickly, communicated clearly through the whole process, and left our home in great shape. Curtis and the team treated us like family — not just another job.
-
David Warner ★★★★★
The way Curtis and his crew handled our situation was old school in the best way — honest, respectful, and thorough. They cleaned out years of buildup without judgment and left the property ready for renovation. Communication was clear from start to finish.
-
Stacy Connelly ★★★★★
We had a mold problem in our basement that two other companies failed to fix properly. iDry came in, identified the source of moisture, and remediated everything correctly. The musty smell is completely gone and the basement is dry. Professional, on time, and fair pricing.
Mold Remediation Resources for Columbus Homeowners
Each page below covers a specific mold topic in depth. Start with the one that matches your situation — or call 614-810-0000 for direct guidance.
-
Cost Guide
Mold Remediation Cost in Columbus — Full Guide
Price ranges by project size, what drives the number up or down, and how insurance coverage works for Columbus mold jobs.
-
Black Mold
Black Mold Removal in Columbus, Ohio
Not all dark mold is Stachybotrys. A professional assessment determines the species and the right removal approach.
-
Basement
Basement Mold Remediation — Columbus
Clay soil, aging foundations, and finished basements that trap moisture. Basement mold remediation covers the full scope.
-
Crawl Space
Crawl Space Mold Remediation — Columbus, Ohio
Up to 50% of indoor air comes from below the living space. Crawl space remediation addresses the source most homeowners never see.
-
Testing
Mold Testing and Inspection — Columbus
Mold testing and remediation work together. Pre-remediation testing identifies the species and scope. Post-remediation testing confirms the job is done. Both protect your investment.
Questions Reynoldsburg homeowners ask about mold
Is black mold handled differently from other mold?
The color doesn't change the process. Stachybotrys, the mold most people call black mold, gets the same containment, HEPA filtration and removal as other species. What changes the job is how far the growth spreads and what is feeding it.
How do you find mold I can't see?
Thermal imaging picks up moisture hidden behind walls and under floors, and moisture meters confirm it at each suspect spot. A musty smell with nothing visible is a common reason people call, and hidden growth is the most common thing our free inspections turn up.
Can I clean the mold myself?
If the patch is under about 10 square feet and on a hard surface, usually yes. Use detergent, dry the area fully and fix whatever made it wet. If it is larger, keeps coming back, or is inside a wall, attic, crawl space or duct, it needs proper remediation.
What is the difference between mold removal and remediation?
Removal cleans or cuts out what you can see. Remediation also contains the area, filters the air, fixes the moisture source and checks that the space is clean and dry. Without that last part, mold tends to come back.
How much will mold remediation cost in Reynoldsburg?
It depends on how far the growth reaches, what is feeding it and how much material has to come out. That is why the free inspection comes before any price. The estimate is then itemized from what the inspection found.
Request a free mold inspection in Reynoldsburg
Same-day scheduling. No obligation. Tell us about your situation and a Columbus mold specialist will contact you within the hour.
Prefer to talk now? Call 614-810-0000 — available 24/7.